A manufacturer of electric infrared heaters, Radiant Panels specializes in quality, custom built medium and long wave infrared electric panel heaters designed for area heating. Their rugged products are made to order and can be built to fit any application.
Radiant Panels are ideal for many applications including:
- Thermoforming
- Web Drying
- Paint Curing
- Food Warming
- OEM Applications
Advantages of Radiant Panels:
- Quality Components for a longer product life
- Manufactures Process Heaters to fit any application specifications
- Watt densities range from 5 to 50 watts/ inch2.
- Designed to fit webs and conveyers with various voltage sources
- Element is easily replacable
- Theremocouple built-in
- In-plant repairability
Series RP-S and RP- SA: Fast Responding Medium Wave Industrial Process Heater
- Quality Components for a long product life
- Manufactured to meet your specifications
- A unique RPI serpentine element design.
- Fast responding- heats in 25 seconds from cold start/ cools down to safe temperature in 25 seconds
- Watt densities up to 50 watts/ in2
- Element temperature up to 2100F
- 120-480 Volt configurations within design limitations
- Solid 1/8" thick extruded aluminum case
- Stainless steel protective face screen
- 1/4-20 x 1" bolts or 1/4-20 tapped holes for mounting.
- 2 x 4 J-box with 12" of high temp lead wires.
- Heater thickness 3.75" or with protective face screen 4.75".
- Maximum width: 24 in, Maximum length: 16 ft
- The Series RP-SA have holes between the elements and blowers on the back of the heater for air flow through the heater.
Series RP-C: Extremely fast Responding Medium Wave Industrial Process Heater
- Quality Components for a long product life
- Manufactured to meet your specifications
- Special low mass corrugated metallic elements
- Fast response- heats in 10-15 seconds from a cold start/ cools to safe temperature in 10-15 seconds
- Watt densities up to 50 watts/ in2
- Element temperatures up to 1600F
- 120-480 volt configurations within design limitations
- Very rigid 1/8" thick extruded aluminum case
- Stainless steel protective face screen
- 1/4-20 x 1" bolts or 1/4-20 tapped holes for mounting
- 2 x 4 J-box with 12" of high temperature lead wires
- Heater thickness 3.75" or with protective face screen 4.75"
- Maximum width: 24 in, Maximum length: 16 ft
Series RP-G: Uniform Long Wave Heat Source
- Quality Components for a long product life
- Manufactured to your specifications
- Radiation surface temperatures up to 1200F
- Rugged construcation can withstand minor impacts without damage
- Will heat all colors equally- very uniform heat
- Industrial aluminized steel case
- Heater case 3" or less
- Maximum width: 24", maximum length: 60"
- Available from 120-480 Volt/ single or three phase
- Wattages from 5 to 20 watts per square inch.
- Heat time of 5-10 minutes
For more information or to discuss your specific heat application needs with an engineer, please contact Busch Electronics or call (651) 288-2580.
